AIRHUB Met Data ReceiverGeneral Description The AIRHUB Met Data Receiver is a digital receiver that receives and decodes telemetry data from XDR-928 dropsondes. It supports upper air soundings from either UAV or research aircraft. The system automatically collects, calibrates and ingests received telemetry and then presents sounding data in real time via TCP/IP networking. Data are stored locally in a database in the event of total data link failure. It supports two way communications either via RJ45 10/100BaseT (LAN) or RS-232 DB-9 serial port (PPP) interfaces. TTL level digital lines support control of XDR-928 battery activation. The system can be used stand alone in piloted aircraft, or Iridium SBD-mode satellite data modems and/or UHF point-to-point radio modems options are available to support UAV based hurricane applications. These RF link options enable feeding sounding data in near real time (within 20 seconds) to downstream Numerical Weather Prediction and hurricane tracking applications in near real time. The system supports a single channel for performing a single XDR-928 sounding at a time. However, three additional optional receiver channels can be added to support reception from four simultaneous XDR-928 dropsonde soundings, and two systems can be ganged together to support up to eight soundings at a time for high altitude drops. Applications
Features
The AIRHUB is connected to a vertical 400 MHz RF telemetry receive antenna. This antenna is typically mounted low on the aircraft. Received data is automatically ingested, and a cyclical redundancy check is used to verify telemetry data integrity before storing internally. It acts as an "Internet appliance" data server and can be remotely administered and monitored via TCP/IP. As XDR data are collected and decoded they can be replicated to a YESDAQ Data Visualization software on a PC located at a ground station. YESDAQ is a key component of distributed sounding display systems, as it provides important replication and near real time data display via web browsers. Setup and Maintenance Setup consists of connecting to 12 Vdc power, assigning a static TCP/IP address for operation on a 802.3 LAN, whereupon these parameters are stored in non-volatile memory. In addition to airborne applications, the AIRHUB can also be installed in mobile command centers for deploying XDR-928 as balloon borne radiosondes. With no moving parts, it is designed for demanding vibration-prone UAV/aircraft applications.
AIRHUB aboard a UAV. The AIRHUB is enclosed in an aluminum chassis, which houses an embedded x86 processor, a digitally controlled FM receiver with commercial grade front end RF filtering, a digital packet data decoder board, 1Gb CF drive for non volatile storage and 10/100BaseT 802.3 interface for LAN use. Standards-based software interfaces support SSH-2 and http and links to YESDAQ database replication. Hardware options listed below are physically affixed beneath it. Options
Specifications Met parameters: ingests all sensor data produced by Model XDR-928 dropsondes, including data from optional sea surface temperature sensors and either 1Hz or 4Hz GPS-derived winds. Physical: 6"x 6" x 5", 13 lbs; Operating Temp Range: -30° C to +60° C Operating Humidity Range: 0-75% RH; Storage Temp Range: -40° C to +85° C Storage Humidity Range: 0-93% RH; non-condensing RF Telemetry Receiver: Frequency Modulation, Frequency Shift Keyed, Manchester encoded 403.1-405.9 MHz from XDR-928 sondes. Error Detection: Cyclical Redundancy Check RF Telemetry Range: 300km (line-of-sight UHF) Data latency: 1 second per record locally, 20 seconds to ground station, via Satcom option. Electrical Interfaces:
DC Power:
Irridium Satcom option additional power:
Physical: 4"x2"x1", 0.5 lbs Quad Telemetry Receiver Option: Multi-channel telemetry option requires additional power:
Physical: 4"x6"x8", 3 lbs |
XDD-938 Expendable Digital Radiosonde
The Model XDD-938 Expendable Digital Radiosonde conducts precise upper air observations using GPS wind finding technology. It is the first system capable of both radiosonde and dropsonde sounding modes, providing vertical profiles of 3D pressure, temperature, humidity and winds. It can either be released manually or used in the Model ARL-9000 launcher, which includes an integrated METHUB ground station.
MFR-7 Multifilter Rotating Shadowband Radiometer
The Model MFR-7 Multifilter Rotating Shadowband Radiometer measures total, diffuse, and direct irradiance at six wavelengths (415, 500, 615, 673, 870, and 940 nm, each 10 nm FWHM) in the visible/NIR, and includes one unfiltered broad-band silicon pyranometer. Thermally stabilized, environmentally sealed state-of-the-art interference filters provide excellent long term calibration stability.
TSI-880 Full-Color Total Sky Imager System
The Model TSI-880 Total Sky Imager is an automatic, full-color sky imager system that provides real-time display of daytime sky conditions. Traditionally, human observers reported sky conditions, resulting in considerable discrepancies from subjective observations. The TSI-880, a self-contained system which automatically processes images, replaces the need for these human observers under all weather conditions.
 |
Who We Are
We design and manufacture quality meteorological instruments for scientists committed to accurate and precise environmental measurements
 |
Our Mission
To engineer the most durable and precise meteorological and environmental sensors on the market
 |
Our Vision
A world where scientists and government agencies work together to solve the meteorological and environmental problems of our generation
